Smart Meters, Stray Voltage, and Targeted Individuals

There is a little known and underreported TI targeting method and symptom based on Stray Voltage, which is usually marked by a dramatic prevalence of ‘static discharges’ when touching things. But there are other symptoms, and happily, tests and cures.

 

by H. Michael Sweeney proparanoid.wordpress.com   Facebook   proparanoid.net  

copyright © 2016, all rights reserved. Permission to repost hereby granted provided entire post with all links in tact, including this notice and byline, are included. Quote freely, links requested. Please comment any such repost or link to original posting.

 

 

What you will learn reading this post:

• What stray voltage is and why it can be a threat, especially for TIs;

• The symptoms and risks of stray voltage (and targeting);

• The possibility of yet another Smart Meter conspiracy;

• How to detect and eliminate Stray Voltage.

 

Stray Voltage?

Stray voltage is the technical term given by the power and electronic industries to a situation where an electrical charge is present in the ground, itself. It can also be present in a structure, such as your home or workplace. It tends to be far more likely to be present at the ground-floor level than upper floors, and is commonly found present at insignificant levels almost anywhere electricity is used. It can even be found in places where there is no AC power nearby present, at all, if there is Quartz bearing rock in the substrate. Concentrations of Ferrous rocks and ground water near the surface can impact, as well.

In structures, the type of structure materials and design can impact prevalence, as can furnishings and the layout of property. And though considered rather rare as an actual problem, for some reason, it is normally thought of or understood as being significantly more problematic in rural farms (especially noted in dairy farms) more than in bedroom communities, though it can be found even in downtown high rise areas. It seems to impact Cows in many observable ways, to include reduced milk production, troubled births, general health and premature deaths.

The power industry takes great care to prevent stray voltage levels from being detectible or able to impact living things, including you and me, but things can go wrong. When that happens, and depending on how strong it ends up being, it can be quite detectible, and generally, unpleasant, if not harmful or even dangerous. Some forms are capable of outright electrocution, such as created by downed high-tension power lines. While this post uses the term Smart Meters in the title, it is less about that, except that a possible conspiracy may exist between Smart Meters and stray voltage, as outlined below.

There are many reasons stray voltage might be present at problematic levels. I see these as divisible into three threat levels and causes. The first may be relatively minor in threat level, caused by natural eventualities unrelated to targeting, and unlikely to escalate in nature. An example might be living near to high-tension lines running parallel to metal fencing on your property, where a kind of induction takes place causing the fence to produce an electrical current.

The second is also unrelated to targeting in causality, but may be far more serious, even dangerous, and quite likely to escalate — such as may due to electrical shorts or combinations of other unhappy electrical happenstances. The important thing to take away is that the bulk of stray voltage may have nothing to do with being targeted, but any presence which is detectible should be of great concern to anyone, and pinned down immediately.

The third? I have recently discovered a new possibility, thanks to a coincidentally… even accidentally discovered set of facts learned from one of my very first TI clients. I say coincidentally, because in considering the new information, it dovetailed very nicely with other client information which had otherwise led nowhere. As result, I am now quite confident that there can be deliberate targeting by artificially creating and controlling stray voltage for the purpose.

It can be used to establish a variety of selectable threat levels and targeting effects (symptoms), to include other forms of electronic targeting. This level is not officially recognized to exist by the power industry, though the potential for conspiratorial knowledge and participation in its use surely exists. One would be unwise to broach the possibility with power companies or other parties, unless part of a legal response effort, as mentioned herein. The good new is, that regardless of the three types, any serious threat levels can be dealt with, almost always.

To weaponize AC power in this way (there are other, previously known and frequently spoken of ways, such as found in my book, MC Realities), simply requires shunting of power to the earth at one or, as is more likely, multiple locations around the property. This would likely be done through a control mechanism to throttle the voltage diverted, even to an ‘off’ position, something akin to a remotely controlled dimmer light switch. Naturally, it will consume significant electricity, and that will turn out to be a blessing, as we shall see.

After reading this short introductory post, a TI would be well served to learn more about the topic, even if not thinking themselves impacted by stray voltage, currently. As the link to that information only addresses the first two reasons, the reader should indeed finish this post, first. After reading BOTH sources, then, and only then should they attempt to fit their circumstances into the dialog and consider the best course of action. Feel free to contact me if unsure, at proparanoidgroup gmail com.

 

Symptoms, regardless of cause

At natural ambient and other low levels of stray voltage there should like be no outward signs discernible. We only need worry about the phenomena if we do start to sense effects. We have all experienced the random static discharge of touching a door knob after walking across a carpet. While discounting such experiences as carpeting woes, they can also be due to stray voltage, which can certainly augment or simulate carpeting-caused static build up, as not all carpets generate the problem to the same degree, or even at all. When you get such discharges in the absence of carpeting, that is a typically a clear sign of stray voltage — though cold dry air can contribute, as well.

Note: normal static discharge is usually relatively high in voltage but low in amperage, quite akin to that associated with spark plugs in an engine; unpleasant to experience, but relatively harmless, more likely to cause injury from jerking away with violent contact with another object, than from the actual shock. They may generate a small visible flash of light, an actual spark jumping a few millimeters, at most. But stray voltage can produce far more varied and dramatic, even dangerous results. There have been instances of seeing discharges which travel inches or even feet, making zapping or popping noises, producing heat. The risk of fire and explosion cannot be ignored, where flammable fumes or pure Oxygen sources might be present. Obviously, the voltage levels in such cases are even higher, as may be the amperage and risk of electrocution.

Serious levels of stray voltage can cause effects similar to other forms of electronic targeting, and may indeed be augmenting such targeting from other sources. In point of fact, especially for persons who also suffer electro-sensitivity, there is a small chance that some persons who see themselves as being a TI may in fact not be. Accidental, or even natural stray voltage might be causing enough symptoms of targeting, by itself, to erroneously presume targeting. This would be good news if the individual is not also experiencing non electronic targeting symptoms, such as organized stalking, or other forms of harassment.
Electronic targeting symptoms are radiographic in nature (radio and electromagnetic), and therefore, stray voltage symptoms, would typically be some combination of any number of things which match those same symptoms. The range of symptoms is broad, from headaches, nausea, dizziness, mood swings, sleep problems, sensations of burning, tingling, vibrating, tinnitus or humming sounds, as well as more unpleasant physiological symptoms such as heart palpitations, chest pains, muscle and joint pains, fibromyalgia-like conditions, twitching or trembling, and so forth. Arguably, there are other symptoms, as well, but these are the more commonly reported ones, and the easiest to identify as being abnormal. That said, the caveat is valid: don’t presume a system does not have a medical explanation; always see a Doctor (without talking about targeting) to make sure you do not have a ‘simple’ health issue in need of treatment.

In fact, stray voltage can simulate or stimulate a variety of general health problems in humans and animals, alike. When doctor’s tests find no other explanation, stray voltage (or other electronic targeting) may be to blame. Some animals are more able to sense stray voltage and will naturally avoid areas where it exists in undesirable levels; they can be ‘Bird Dogs’ to the problem by strange behaviors or health issues. High levels of stray voltage can also cause plants to die, or may result in random discharges between objects otherwise insulated. By way of example, a visible mini-lightening flash between an automobile and the ground or nearby fence or garage door frame.

The interesting thing about stray voltage is that its effects may be amplified by humidity and moisture, or even temperature. Therefore, such effects might tend to be more noticeable if walking in the rain or while wet, as when exiting the shower. Serious stray voltage could make swimming pools and standing water dangerous. But even relatively harmless but noticeable levels of stray voltage can be dangerous, because whatever is causing them could be capable of sudden and unexpected increases to dangerous levels. Take no chances, and deal with it right away, if symptoms are present. See below.

 

Smart Meters and stray voltage; a possible new conspiracy

The cover story for the hazmat-like wardrobe used in Smart Meter installation is ‘arc flash’ protection, yet no such precautions are needed for ordinary meter installation. In the UK, the protection is even heavier duty than this; suitable for sci-fi spacemen.

A lot of people, including many TIs, feel that the entire power industry’s move to Smart Meters is a Big Brother and/or industry conspiracy. Like most good conspiracies, there are multiple theories involved, ranging from price gouging to spying to mind control, and more. But the big concern and commonality in many of these theories tends to include the very same health issues as found in stray voltage.

Yet when the industry itself, as well as third-party independent testing firms investigate, most such studies indicate smart meters are no more dangerous than your computer’s wifi connectivity. I’m quite unconvinced about their conclusions, but I also understand how conspiracies work, and how the intelligence community thinks — and specifically, how they think about and employ mind control tactics.

It dawns on me as result of the dichotomy between the reality of Smart Meter user experience and test results, that there may be a conspiratorial answer which explains the conflict. Once a Smart Meter is installed, perhaps Big Brother comes along and uses the Meter to establish stray voltage. That would account for the health effects and higher bills, and certainly still enable spying and mind control capabilities.

The simple fact is, the studies giving a clean bill of health to Smart Meters are only testing the meters and the air waves. They are not testing for stray voltage. So, if you have a Smart Meter and are experiencing Smart Meter woes, perhaps you ought to test for stray voltage. If you find it exists, you will undoubtedly be advised by a lawyer that you have an excellent actionable case against the power company.

Note: It has been discovered that the power industry, in order to address public distrust of smart meters, is instead apparently installing meters which look identical at a glance to the old mechanical meters, but which conceal a ‘trojan horse‘ Smart Meter under the skin. They are, however, supposed to be easy to spot. TAKE NO CHANCES, and check YOUR METER, today, even if an ‘opt out’ user. And, if told you were not getting a Smart Meter and discover a trojan horse, you once more have a reason to contact a lawyer, and the media.

 

Stray voltage as targeting weapon

Deliberately causing stray voltage as a harassment tool is not the only ‘advantage’ to perps. Because electricity can carry embedded RF signatures, it can cause an entire area, such as a home and its yard, to become a kind of transmitter of other forms of targeting signals, just as can house wiring. It can therefore become a kind of amplifier of such methods. But to employ it requires something which should ideally be relatively easy to detect, and defeat.

Simply shunting your existing AC power to ground, a deliberate ‘short,’ if you will, is NOT normally going to be done because the power bill would go up dramatically, and tip the victim off that something was amiss. Therefore, the perp would need a second electrical service on site, which means a separate meter head, which they then ‘weaponize’ for the purpose. In apartments, it might simply mean using a neighboring unit’s meter. In a home, it may mean a separate power line to a concealed meter somewhere on the property or just outside the property line. It may be an underground service, even if the property is otherwise serviced by an overhead feed.

In an apartment situation, all the meter heads for a group of units are mounted at the same location, and labeled as to address/unit. If suspicious, you can wait until a high consumption power period (i.e., using your stove to cook), and then go look at the meters. If you do this when you see signs no one is present at the suspect neighboring unit (not using their stove), but their power meter is drawing more power — you may have found proof of the method and the perp.

In the case of a single domicile, simply call the power company and ask if there is more than one meter assigned to the address, or if there is a meter or extra meter assigned to neighboring lots. If the answer is yes, ask if any extra meter is in use and being billed, or if you might be able to acquire the meter for your own use (to justify why you ask). Any extra meter may be proof of the method and, with some legal steps, lead to identifying a perp.

 

Proving stray voltage

To confirm any such targeting, you will need to prove stray voltage is present, the same thing which should be done if symptoms are present and targeting is not involved. There are three ways to do this. One is to call the power company, which has a legal liability to insure stray voltage does not exist, in the same manner that natural gas providers must worry about gas leaks. Another is to call an electrician. Either of these methods can also result in identifying and curing the source cause of stray voltage. It will likely be up to you to document their findings, such as with video or witnesses — though they may be willing to provide written documentation where they bear no liability risk. Again, you probably should not mention targeting concerns to these people.

The third method is less useful in terms of evidence unless you are an electrical engineer or have similar credentials validating the quality of your findings; you can obtain test equipment and test the matter yourself, again documenting every step as you go. It is not quite as simple as the illustrated image, and should involve more than one kind of instrument. The procedures will vary depending on where you need to test, and what the location is like or contains in the way of objects and surfaces. The entire property should be assessed, and if done usefully, will ‘map out’ zones of impact from high to low. More information on the ‘how’ is available online, including that link you should read after finishing this post.

Regardless of which method used, where targeting is suspected, know that the power can be turned off remotely as soon as any perps involved discover testing is about to take place. This means you will want to covertly order any such tests, and ideally, try to find a way to avoid having whomever shows up to conduct the test show up in a marked truck, and having them quickly first test somewhere out of sight from any possible perp surveillance position. THAT is the hard part. Doing that yourself is much easier, of course.

 

Impact, conclusion

If you are a TI or suspect same, I urge all readers of this post to comment as to their findings or conclusions upon further investigation. In two and a half decades of contact with 12,000 TIs, I have only known of perhaps three or four cases where stray voltage was in any way evidenced. As result, it appears to be an entirely ‘unknown’ targeting method (assuming such was the case). I have only recently been made aware of the possibility that a power company can have two different meter heads assigned to a property under two different account names WITHOUT the property’s  owner/renter’s awareness, even though BOTH are in use — by SOMEONE.

It can only serve the greater TI community to learn if this is more wide spread than thus far observed, especially given that it can be easily detected and defeated if and when in use. Ditto because of the advent of Smart Meters, in which case this new information may be a very useful weapon for use by activists against the power industry, and legal pressure (lawsuits) by user-victims. It is equally important because where targeting is not involved, education on topic may lead to resolving a potentially deadly stray voltage of less sinister origin, and address final cure to otherwise unresolvable health issues.

And, in closing, let me state it once more. Any instance of serious stray voltage, even if not related to targeting, likely represents an actionable legal issue; you should consult with a lawyer about suing the Power Company and/or whomever pays the bill on any secondary meter head causing the effect, or any otherwise weaponized meter head.